What is the latest driver for the SMART-51 and is it backwards compatible?

What is the latest driver for the SMART-51 and is it backwards compatible?

The SMART-51 driver is now Microsoft Certified and is now on the www.idp-corp.com website (Support > Download > Installation CD): http://www.idp-corp.com/index/bbs/board.php?bo_table=s4_1&cate=22

The SMART-51 driver has advanced features similar to the SMART-70 driver, so it is NOT backwards compatible to the SMART-30 or 50 Series printers.

But, if you are integrating the SDK, the SMART 51 Series SDK is the same as the SMART-30 / 50 SDK.
    • Related Articles

    • The SMART printer doesn't print.

      1. Check the connected state of the USB cable to the USB port on the backside of the SMART Printer.   2. Check the connected state of the USB cable to the USB port of your PC.   3. Check the operating state of the SMART Printer driver in the Devices ...
    • Smart ID - latest version

      Hi Jeff, Here is a link to the latest version of Smart ID Software. Please remember that it only works with our SMART ID Card Printers. https://spaces.hightail.com/space/njfA7QvPy5 thanks IDP Support
    • The SMART ribbon has snapped

      1. You can reconnect snapped ribbons together by using a piece of tape.   2. The reasons for a snapped ribbon are below.     - Check the size and the surface condition of the cards you are using. If you use a defective card, the ribbon may snap or    ...
    • Hi,I am trying to install Smart driver on Win 10 and the green bar never finishes after turning the printer on.

      Windows10 requires the driver to be certified by Microsoft. We are in the middle of that process (Aug2017), but until then please see the article to explain how to install our drivers: ...
    • The SMART printer will not move or accept card.

      1. Check the card thickness control lever and adjust it to the current card's thickness.          2. Check the contaminated state of the Hopper Roller and clean it. When the Hopper Roller is contaminated,      the SMART Printer may be unable to move ...