SMART Design and SMART DB

SMART Design and SMART DB

What happened to the Smart Design and Smart DB software?  One of my customers uses this for the design of their labels.  In dealing with an error in their software, they removed this application among others.  As a result, I can't open the .csd design files. Please advise where I can find the updated version of this previously freely distributed software.  Thanx in advance for your prompt attention to this matter.

Here is a link to the old versions of the software if you want to reinstall it: https://spaces.hightail.com/space/ZnrglAlRkC

The new version will open the older version projects.

Here is a link to the new version: https://spaces.hightail.com/space/njfA7QvPy5
    • Related Articles

    • The SMART printer doesn't print.

      1. Check the connected state of the USB cable to the USB port on the backside of the SMART Printer.   2. Check the connected state of the USB cable to the USB port of your PC.   3. Check the operating state of the SMART Printer driver in the Devices ...
    • Smart ID - latest version

      Hi Jeff, Here is a link to the latest version of Smart ID Software. Please remember that it only works with our SMART ID Card Printers. https://spaces.hightail.com/space/njfA7QvPy5 thanks IDP Support
    • What is the latest driver for the SMART-51 and is it backwards compatible?

      The SMART-51 driver is now Microsoft Certified and is now on the www.idp-corp.com website (Support > Download > Installation CD): http://www.idp-corp.com/index/bbs/board.php?bo_table=s4_1&cate=22 The SMART-51 driver has advanced features similar to ...
    • The SMART ribbon has snapped

      1. You can reconnect snapped ribbons together by using a piece of tape.   2. The reasons for a snapped ribbon are below.     - Check the size and the surface condition of the cards you are using. If you use a defective card, the ribbon may snap or    ...
    • The SMART printer will not move or accept card.

      1. Check the card thickness control lever and adjust it to the current card's thickness.          2. Check the contaminated state of the Hopper Roller and clean it. When the Hopper Roller is contaminated,      the SMART Printer may be unable to move ...